Building a hexagonal gazebo is not as complicated a process as you would think. Gazebos provides a place to spend some happy times with family and friends. Building a gazebo also gives the owner a sense of pride and achievement. Gazebos made of wood are considered robust and most beautiful. You can use redwood, rosewood or cedar to make a wooden gazebo.
You can choose from different styles to suit your taste, which makes your look stand out from the rest of them. There are some basic techniques for building a gazebo that you need to follow.
Let's look at the steps that lead you through the construction.
Select the location : Clean the area and level it by pouring gravel layers. Set four batteries by customizing them perfectly to have a square from where you can design the hexagon. Mark and pin the square and hold it in a semicircle. Then mark and pin the other sides so that the hexagonal extremities are finished.
Repeat the most important posts : Find the right angle for the posts on the inside. Then pull a perpendicular line at 90 degrees on the outer foot to place the posts correctly. Screw the metal brackets to the bolts that protrude and screw in the posts. Find the vertical lodge to keep the insert aligned with temporary shoulders.
decking : Building a hexagonal gazebo requires you to build the floor frame and mark posts of 15 "and 21" from the ground. Cut the inside of the posts between the ground trim off the wood to bring in the beams. The rays must be cut at a 60 degree angle at both ends with a saw. The rays will now form a 360 degree round angle that fits into the hexagon shape and secure them with nails.
Collect the beams : Screw the metal beams on the beams halfway and make them sit in the belt hanger next to them. Now attach the beams with both sides at 30 degrees to form a 60 degree angle on the pier and they will form a 360-angle. The boards must be cut from the circumference to the center with the bolts screwed on each side. Apply wood putty to the level recesses that will give it a stylish look.
Stairs for the main entrance : Stairs are a better alternative to the main entrance for easy access. Dig the ground 6 "in front and level it by adding 1" gravel and sand. Form two beams with a miter saw to match the height of the stairs and secure them with the metal braces. Now screw up the two horizontal starboards on both beams and nail the wooden ladder on the corner.
Roofing : Fit a round hexagonal perimeter and cross beams to mimic the railings followed by clamping over double beams from all sides. Cut four half-length beams at one end at 90 degrees to trace into the beam at opposite ends in such a way that they will form a 360 degree angle. The final step in building a hexagonal gazebo is to cut the latches, the strap and secure them at the desired span and coat the ceiling.